Home > S2000 Products
S2000 Products
  Brakes
  Driveline
  Engine Components
  Exterior Parts
  Forced Induction
  Intake & Exhaust
  Interior Parts
  Suspension

Suspension Lower X Brace - (00-07 S2000)
CT Engineering S2000 Lower X Brace - (00-07 S2000)


  • Improves handling by reducing chassis flex in front sub-frame
  • Low profile chromoly Aero tubing
  • Gives maximum ground clearance
  • Easy oil changes without removing brace
  • Application:  00-09 Honda S2000
  • Installation time:  30min +/-
more info
Billet Rear Tie Bar (00-06 S2000)
CT Engineering Billet Rear Tie Bar (00-06 S2000)


  • Rear Lower Suspension Brace
  • Clear Anodized Billet Aluminum
  • Replaces stock brace between rear lower control arms
  • Helps to increase chassis stiffness
  • Application:  00-09 S2000
  • Installation time:  15 minutes +/-
more info
Exhaust, Stainless Cat-Back (00-03 S2000)
CT Engineering Exhaust, Stainless Cat-Back (00-03 S2000)

  • Three-piece 304 Stainless Steel cat-back
  • Polished Stainless Steel Resonator and Mufflers
  • 3.5" Polished Stainless Steel Resonated Tips
  • Gives the S2000 a smooth low tone, without being too loud
  • This is the perfect system for street use
  • Extensive track testing for reliability and sound measurements
  • Application: 00-03 Honda S2000
  • Installation time: 1/2 hour +/-
more info
Exhaust, Stainless Cat-Back (04-07 S2000)
CT Engineering Exhaust, Stainless Cat-Back (04-07 S2000)

  • Three-piece 304 Stainless Steel cat-back
  • Polished Stainless Steel Resonator and Mufflers
  • 3.5" Polished Stainless Steel Resonated Tips
  • Gives the S2000 a smooth low tone, without being too loud
  • This is the perfect system for street use
  • Extensive track testing for reliability and sound measurements
  • Application: 04-07 Honda S2000
  • Installation time: 1/2 hour +/-
more info
Air Filter, High Flow, Stock Airbox (00-09 S2000)
CT Engineering Air Filter, High Flow, Stock Airbox (00-09 S2000)

  • Two-stage, hi-flow, "drop-in" filter upgrade
  • Fits into Stock OEM air box
  • Includes filter, and inlet adapter
  • 3hp gain at the wheels
  • Application: 00-09 Honda S2000
  • Installation time: 10 min +/-
  • Cleaning and re-oiling kit available (here)
more info
Air Filter Replacement (Icebox)
CT Engineering Air Filter Replacement (Icebox)

  • Replacement Air Filter for both the CTE Iceboxes used in the Supercharger kits and the intake kits
  • SOLD INDIVIDUALLYli>Installation time: 5 min +/-
  • Cleaning and re-oiling kit available (here)
more info
Cold Air Intake (00-05 S2000)
CT Engineering Cold Air Intake (00-05 S2000)

  • NEW UPDATED BOX DESIGN
  • New box design allows for greater hood clearance and simple prop-rod install
  • Cold Air Intake with reusable two-stage foam filter element
  • Carbon fiber lid on air box
  • Will not ingest water
  • Slightly louder than stock
  • Air box suppresses noise from filter element
  • CARB legal for street use in California
  • Application: 00-05 Honda S2000
  • Cleaning and re-oiling kit available (here)
more info
Cold Air Intake (06-09 S2000)
CT Engineering Cold Air Intake (06-09 S2000)

  • NEW UPDATED BOX DESIGN
  • New box design allows for greater hood clearance and simple prop-rod install
  • Cold Air Intake with reusable two-stage foam filter element
  • Carbon fiber lid on air box
  • Will not ingest water
  • Slightly louder than stock
  • Air box suppresses noise from filter element
  • CARB legal for street use in California
  • Application: 06-09 Honda S2000
  • Cleaning and re-oiling kit available (here)
more info
CT Engineering Supercharger Kit - Aftercooled (06+ S2000)
CT Engineering Supercharger Kit - Aftercooled (06+ S2000)

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.
  • This kit is designed so that it can be removed without any modifications to the factory components.
  • Application: 06 Honda S2000
  • Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be refunded upon return of a undamaged stock crank pulley.
  • Installation time: 12 hours +/-
  • Shipping dimensions (2 boxes): Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)
  • Cleaning and re-oiling kit available (here)
more info
CT Engineering Supercharger Kit - Aftercooled (00-01 S2000)
CT Engineering Supercharger Kit - Aftercooled (00-01 S2000)

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.
  • This kit is designed so that it can be removed without any modifications to the factory components.
  • Application: 00-01 Honda S2000
  • Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be refunded upon return of a undamaged stock crank pulley.
  • Installation time: 12 hours +/-
  • Shipping dimensions (2 boxes): Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)
  • Cleaning and re-oiling kit available (here)
more info
CT Engineering Supercharger Kit - Aftercooled (02-03 S2000)
CT Engineering Supercharger Kit - Aftercooled (02-03 S2000)

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.
  • This kit is designed so that it can be removed without any modifications to the factory components.
  • Application: 02-03 Honda S2000
  • Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be refunded upon return of a undamaged stock crank pulley.
  • Installation time: 12 hours +/-
  • Shipping dimensions (2 boxes): Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)
  • Cleaning and re-oiling kit available (here)
more info
CT Engineering Supercharger Kit - Aftercooled (04-05 S2000)
CT Engineering Supercharger Kit - Aftercooled (04-05 S2000)

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.

  • This kit is designed so that it can be removed without any modifications to the factory components.
  • Application: 04-05 Honda S2000
  • Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be refunded upon return of a undamaged stock crank pulley.
  • Installation time: 12 hours +/-
  • Shipping dimensions (2 boxes): Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)
  • Cleaning and re-oiling kit available (here)
more info
CT Engineering Reinforced Differential Housing (S2000)
CT Engineering Reinforced Differential Housing (S2000)

  • Developed to help retain the differential and ring gear from getting forced out the back cover under hard acceleration.
  • This upgrade is highly recommended for customers who are considering the CT Engineering Supercharger, or who drive their S2000 hard on a regular basis. It is very common for the factory differential housing to break; even on a completely stock vehicle.
  • ARP Hardware included
  • Housing is sold on exchange basis.
  • Core charge is $370 and will be added to your order. Return shipping is not included.
  • The time limit on core return is 30 Days.
  • If you've already broken your differential, this core charge will not be refundable.
  • Driving Ambition offers full rear end rebuilding and set up service. Please call for an estimate.
more info
Uni Filter Service Kit
Uni Filter Service Kit
Our Price: $15.95

  • Complete Filter Service Kit
  • All you'll need to maintain your Uni-filter
  • Contains one 14.5 oz. Aerosol Bottle of Filter Cleaner, and one 5.5 oz. Aerosol Bottle of Filter Oil
  • Your Uni-filter should be cleaned every other oil change, or when filter looks dirty
  • Instructions included
  • GROUND SHIPPING ONLY
  • Shipping dimensions: 12 X 6 X 6 (inches) (3 lbs.)
  • Cannot ship to International Destinations
more info
MoCOOL  (RADIATOR ADDITIVE)  (1/2 liter)
MoCOOL (RADIATOR ADDITIVE) (1/2 liter)
Our Price: $16.95

  • MoCool Top engine cooling additive
  • Reduce engine temperature by 15°C (30°F)
  • Outstanding thermal exchange
  • Concentrated cooling fluid
more info
DA O2 Sensor wire extension harness
DA O2 Sensor wire extension harness
Our Price: $25.00

DA O2 Sensor Wire Extension Harness
  • 30" long
  • Each harness is tested
  • OEM Honda Connectors
more info
AEM Air Inlet Temperature (AIT) Sensor Kit Sensor
AEM Air Inlet Temperature (AIT) Sensor Kit Sensor
Our Price: $57.75

  • Air inlet temperature sensor kit.
  • Includes aluminum weld-in bung, connector plug with flying lead & sensor.
more info
AEM Wideband UEGO Replacement Sensor
AEM Wideband UEGO Replacement Sensor
Our Price: $88.88

  • This is the Bosch manufactured Wideband "Replacement" Sensor for AEM Wideband UEGOs.
  • This works with the AEM digital and Analog Wideband Gauges,
  • EMS's with the built in UEGO, and the new AEM inline Wideband UEGO.
  • This is a Bosch LSU 4.2 sensor that has been calibrated to work specifically with the AEM UEGO line of products.
more info
AEM Boost Control Solenoid Kit Solenoid
AEM Boost Control Solenoid Kit Solenoid
Our Price: $101.00

  • Boost control solenoid kit
  • with 1/8-NPT.
  • Includes -4 adaptors, barb adaptors, connector plug with flying lead & solenoid.
more info
AEM Universal Adjustable Fuel Pressure Regulator
AEM Universal Adjustable Fuel Pressure Regulator
Our Price: $133.00

  • AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for engines up to 1000 horsepower.
  • AEM's patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump.
  • AEM's universal fuel pressure regulator is tapped to accept a -6 AN, or 9/16”x18 fittings and includes a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up.
more info
AEM Fuel Pressure Regulator for Honda S2000 2000-2005
AEM Fuel Pressure Regulator for Honda S2000 2000-2005
Our Price: $140.00

  • AEM's Honda/Acura Adjustable Fuel Pressure Regulators are capable of supporting enough fuel flow for engines up to 1000 horsepower.
  • AEM's patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump.
  • AEM includes a custom barb fitting to accommodate the factory fuel hose and the base of each regulator is tapped to accept a -6 AN or 9/16”x18 fittings.
  • This product fits the following vehicles: 2000/2003 Honda S2000 2.0L VTEC and 2004/2005 Honda S2000 2.2L VTEC
more info
AEM Inline Wideband UEGO Controller
AEM Inline Wideband UEGO Controller
Our Price: $179.95

  • The Inline Wideband UEGO gives all the benefits of the AEM Wideband Air/Fuel Gauges to those who do not require or want an additional gauge in the car.
  • Perfect for datalogging, engine management systems or racing applications where a gauge is not desired.
  • Simple wiring and installation, the controller is weather proof and can be mounted anywhere in or outside the vehicle.
  • Replacement senors can be ordered (here)
more info
AEM Fuel Rail for Honda S2000 2000-2005
AEM Fuel Rail for Honda S2000 2000-2005
Our Price: $199.00

  • AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower.
  • This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes.
  • An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge.
  • A custom fuel line fitting is included for the factory fuel line, and the ends of each rail are pre tapped to accept -6 AN or 9/16”x18 fittings for users who want to use custom fuel lines.
  • This product fits the following vehicles: 2004 to 2005 Honda S2000 2.2L VTEC 2000 to 2003 Honda S2000 2.0L VTEC
  • Installation time: .5 hours +/-
more info
AEM EMS Series 2 (Honda S2000 00-05)
AEM EMS Series 2 (Honda S2000 00-05)
Our Price: $1,390.00

  • Plug-N-Play Engine Management
  • Uses Factory Harness
  • Boost Control, Traction Control, Fuel and Timing Control
more info
KW V1 Suspension kit (S2000 00-09)
KW V1 Suspension kit (S2000 00-09)
Our Price: $1,495.00

Variant 1 spirited and balanced

The ideal systems for customers wishing to rely on the experience of our engineers yet

determine their own degree of lowering. In extensive driving tests our engineers have

set the dampers for the best balance between spirited driving, comfort and safety.
  • Optimized dampening technology for a balance of performance and comfort
  • “inox-line“ stainless steel technology
  • Individually height adjustable
  • TÜV-tested lowering range
  • High-quality components for long term durability
  • Detailed instructions for ease of use
more info
OS Giken S2000 LSD
OS Giken S2000 LSD
Our Price: $1,590.00

OS Giken Limited Slip Differential for Honda S2000 (all years)
  • Great throttle on steering response out of turns
  • Kit comes with just the LSD
  • Still very streetable when using the Motul Gear FF 75/140 (here)
  • Driving Ambition offers full rear end rebuilding and set up service. Please call for an estimate
  • Great idea to use with CT Eng. Reinforced Diff Housing (here)
more info
KW V2 Suspension kit (S2000 00-09)
KW V2 Suspension kit (S2000 00-09)
Our Price: $1,850.00

Variant 2 sporty and personalized 

The system intended for the experienced driver who requires to not only determine the

individual lowering of their vehicle, but adjust the damper setting to fi ne tune the

system to their needs. The adjustable rebound damper allows adjustment of the pitch

and roll behavior of the vehicle, adapting it to one‘s own driving preferences.
  • Damping technology with individually adjustable rebound
  • “inox-line“ stainless steel technology at no additional charge
  • Individually height adjustable
  • TÜV-tested adjustment range
  • High-quality components for long term durability
  • Detailed instructions for ease of use
  • Infinitely adjustable rebound damping
more info
KW V3 Suspension kit (S2000 00-09)
KW V3 Suspension kit (S2000 00-09)
Our Price: $2,495.00

Vairant 3 race technology for the road

The Variant 3 is state-of-the-art technology for the skilled and experienced driver. The

separate and independent compression and rebound damping options allow a truly

individual driving set-up. These unique systems with the 3 individually adjustable

components, allows for adjustment of the compression of the damper in the low-speed

range, while the high-speed set-up, so decisive for driving comfort, has been pre set by our

engineers.

  • Independently adjustable damping technology
  • -rebound and compression damping
  • “inox-line“ stainless steel technology at no extra charge
  • Individually height adjustable
  • TÜV-tested adjustment range
  • High-quality components for long term durability
  • Detail instructions for ease of use
  • Infinitely adjustable rebound damping
  • 14- level adjustable compression damping
  • Unique, independently functioning damping
  • power adjustment
more info